- -10%
- Out-of-Stock
WIPER BELTS (SIIT) Pr CP-100s - U00101674100
New or reconditionned at the best price
Free delivery from 300€ (Metropolitan France, spare parts and inks only)
Satisfied or refunded (within 14 days)
Data sheet
This set of 2 original wiper belts is suitable for Seiko Colorpainter 64S / 100S printers.
The Seiko part number is replacement number U00101674100 / Q6665-60067 is U00036663600).
Circumference of 24.4 cm and width of 1.5 cm.
16 other products in the same category:
MB9950 - Summa S140T Belt 110 T 9,5mm wide
Summa S140T Belt 110 T 9,5mm wide MB9950
- -50%
- -50%
- -30%
- -30%
- -50%
- -50%
3010110729 - Arizona 61xx Belt Carriage Drive
Arizona 61xx Belt Carriage Drive 3010110729
- -70%
- -70%
TOOTHED BELT 160 for CG60FX - M800709
This 160 timing belt is suitable for Mimaki CG-160FX. Original Mimaki (number M800709). This 160 timing belt is 4035 mm long and 15 mm wide.
- -30%
- -30%
3010103685 - DRIVE CARRIAGE BELT
3010103685 - DRIVE CARRIAGE BELT ( L 7490mm x W 38mm )
- -40%
- -40%
Q6659-60175 - Carriage (scan-axis) belt - For...
Carriage (scan-axis) belt - For 44-inch printer series (see tensioner Q5669-60672) Q6659-60175 Q6659-40077
Belt, Carriage Drive - 3010112872
Belt Flat M - 3010112872 ( L 8260mm x W 50mm )
- -50%
- Out-of-Stock
- -50%
CH971-90710 - Carriage Drive Timing Belt
CH971-90710 (was 0900710) - FRM,BLT,CARRDRV_TIMNG, MXABCDHIJ This is the carriage-drive timing belt between the carriage-drive motor and the carriage-drive shaft. ( Z-AB-SST-Belt) CQ114
- -60%
- -60%
TIMING BELT - 200S3M339UG
This belt is suitable for the Mimaki printers JF-1610 and JF-1631. It is the original Mimaki part (number 200S3M339UG). This belt has a circumference of 339 mm and a width of 20 mm.
- -10%
- -10%
Seiko TIMING-BELT-Y (STS 200S2M-416G) - U00112440300
Seiko TIMING-BELT-Y (STS 200S2M-416G) - U00112440300
- -40%
- -40%
3010111207 - Arizona 61xx Belt Gantry
Arizona 61xx Belt gantry 3010111207
- -70%
- -70%
- -50%
- -50%